TCH.1C-27J-2-27JG
Consumable Material Required:
LCM
No.
NOMENCLATURE
P/N
QTY
00052
PIN, COTTER
MS24665-153
4,00
Safety Conditions:
maintenance.
PROCEDURE:
2-11.1
(refer to figure
)
1.Insert a rigging pin (1) (AGE NO. 00181) in the LH
sector group (3) in center wing section.
2.Insert a rigging pin (9) (AGE NO. 00181) in the RH
sector group (10) in center wing section.
3.Remove from LH sector group in center wing section
(3) the cable-lock clevis (7) by removing bolts (8),
washers (6), castellated nuts (5) and cotter pins (4).
Discard removed cotter pins.
4.Remove from RH sector group in center wing section
(10) the cable-lock clevis (12) by removing bolts (11),
washers (13), castellated nuts (14) and cotter pins
(15). Discard removed cotter pins.
5.Remove the retaining clips (17, 18, 20 and 21) then,
acting on the turnbuckles (16 and 19), release the
cable tension. After loosen completely turnbuckles (16
and 19).
6.Remove the cable stretches (2) from LH sector group
(3) groove in center wing section and from RH sector
group (10) groove in center wing section.
27-10-05
2-77