TCH.1C-27J-2-27JG
2-11.2
) and
(refer to figure
)
1.Install cable stretches (2) in the LH sector group (3) in
center wing section and in the RH sector group (10) in
center wing section.
2.Install the retaining clips (17, 18, 20 and 21) then,
acting on the turnbuckles (16 and 19).
CAUTION
––––––––––––––––––––––––––––––––––
Do not perform the complete tension of
the cable.
––––––––––––––––––––––––––––––––––
3.Loosen turnbuckles (16 and 19) and perform the cable
tension (2).
4.Connect at the RH sector group in center wing section
(10) the cable-lock clevis (12) by using bolts (11),
washers (13), castellated nuts (14) and new cotter
pins (15) (LCM NO. 00052).
5.Connect at the LH sector group in center wing section
(3) the cable-lock clevis (7) by using bolts (8),
washers (6), castellated nuts (5) and new cotter pins
(4) (LCM NO. 00052).
6.Remove a rigging pin (9) (AGE NO. 00181) from RH
sector group (10) in center wing section.
7.Remove a rigging pin (1) (AGE NO. 00181) from LH
sector group (3) in center wing section.
FOLLOW ON MAINTENANCE:
1.Restore hydraulic power system (refer to manual
2.Connect electrical power to aircraft (refer to manual
3.Close the access panels 553A, 553B and 553C.
4.Remove maintenance platform (AGE NO. 00074).
5.Perform the functional test and adjustment:
27-10-05
2-78