TCH.1C-27J-2-27JG
Consumable Material Required:
LCM
No.
NOMENCLATURE
P/N
QTY
00052
PIN, COTTER
MS24665-153
6,00
00179
RING, LOCKING
68538-101
1,00
00408
NUT, LOCKING
68537-101
1,00
Safety Conditions:
maintenance.
PROCEDURE:
2-19.1
REMOVAL (refer to figure
) , (refer
to figure
1.Loosen the locking nut (9) and remove the locking ring
(10). Discard removed the locking nut and locking
ring.
2.Extract the flanged failrlead (11).
3.Remove the cables lock (16, 31 and 37) by removing
the cotter pins (13, 28 and 35), loosening the nuts (14,
29 and 34) and by removing the bolts (18, 33 and 38)
and washers (15, 30 and 36). Discard removed the
cotter pins.
4.Release cables tension for the following cables:
A.LH (RH) aileron outer wing cable (if is necessary
remove the LH (RH) aileron outer wing cable in
accordance with maintenance task remove/replace
LH (RH) aileron outer wing cable (refer to para
) ).
B.Aileron center wing cable (if is necessary remove
) ).
(Cont'd)
27-10-15
2-151