TCH.1C-27J-2-27JG
2-22.9
) ,
(refer to figure
) (Cont'd)
11.Release the Pilot (Copilot) left pedal (2) to neutral
position.
1.Turn off and disconnect the hydraulic from ground
connection.
2.Remove any template (AGE NO. 00106) installed.
2-22.11 FRICTION MANOUVRE EFFORT AND
) and (refer to figure
1.Ensure that both hydraulic systems are powered at
3000 psi (210 Kg/cm
²
).
2.Ensure that the Pilot and Copilot rudder pedals (1 and
2) are in neutral position.
3.With the test equipment for pedals effort
measurement (AGE NO. 00008) plus the
dinamometer installed on the left pedal (2), apply a
load until the left pedal (2) begins to move. Check that
the breakout force is 90 N (20.23 lbf) (9.17 kg) max.
4.Push the left pedal (2) stepwise until to reach the
mechanical stop. Read the related effort value on
dynamometer (loading phase) and record on the
Table 2-4.
5.Release the left pedal (2).
6.Remove the test equipment (AGE NO. 00008) from
the left pedal (2) and install on the right pedal (1).
7.Push the right pedal (1) stepwise until to reach the
mechanical stop. Read the related effort value on
dynamometer (loading phase) and record on the
Table 2-4.
(Cont'd)
27-20-00
2-184