TCH.1C-27J-2-27JG
2-24.1
REMOVAL. Proceed as follows:
(Cont'd)
-Unscrew the two bolts, collect washers and
nuts, and remove the fair lead.
E.Remove the two cotter pins that fix the rudder
cable with rudder quadrant.
F.Remove the plates fair leads around of the rudder
cables between rear skin and vertical fin in the
following way:
1.unscrew bolts, collect washer and plates.
A.Remove the cable lock clevis on the rear rudder
quadrant (vertical fin) in the following way:
-Unscrew the two bolts, collect washers and
nuts, and remove the cable-lock clevis.
B.Unscrew completely the turnbuckles.
C.Remove the guard pins.
D.Remove the rudder cable.
2-24.2
INSTALLATION. Proceed as follows:
A.Install the new rudder cable.
B.Position the Rudder cables on the rudder quadrant
(Cockpit Under floor), then insert the two cotter
pins in order to fix the cable with rudder quadrant.
(Cont'd)
27-20-05
2-203