TCH.1C-27J-2-27JG
2-26.3
) , (refer
to figure
2.Install the template for rudder travel check (AGE NO.
00106).
3.Ensure that the spring feel unit (10) is connected and
no rigging pin is inserted.
4.Connect Hydraulic Test Stand (AGE NO. 00262) and
supply the hydraulic systems No. 1 and No. 2 to 1000
psi (70 kg/cm
²
).
5.By means of test equipment (AGE NO. 00008), push
forward the Copilot left pedal until the rudder position
is 35 -0
°
/+0.25
°
leftwards.
6.With the left pedal pressed as per step 4, adjust the
mechanical stop (9) on copilot assy against pedal
lever, then release the pedal.
7.Tighten the lock nut (8), then press again the Copilot
left pedal and check that the rudder travel is still 35
-0
°
/+0.25
°
leftwards.
8.Release the Copilot left pedal to neutral position.
9.Move the manoeuvre effort test equipment (AGE NO.
00008) to the Pilot right pedal assy.
10.By means of test equipment (AGE NO. 00008), push
forward the pilot right pedal until the rudder position is
35 -0
°
/+0.25
°
rightwards.
11.With the Pilot right pedal pressed as per step 9.,
adjust the mechanical stop (9) on Pilot assy against
pedal lever, then release the pedal.
12.Tighten the lock nut (8), then press again the Pilot
right pedal and check that the travel rudder is still 35
-0
°
/+0.25
°
rightwards.
13.Release the Pilot right pedal to neutral position.
(Cont'd)
27-20-15
2-221