TCH.1C-27J-2-27JG
2-30.1
REMOVAL. For remove the Rudder quadrant
proceed as follows:
(Cont'd)
C.Slack the Rudder Cables/L Elevator cables by
means of turnbuckles in the upper cargo zone
nearthe cabin (if is necessary Remove the Rudder
cable/L elevator cable in accordance with
maintenance task remove/replace rudder cable/L
elevator cable).
D.Remove the cables from their seats on the Rudder
quadrant / Elevator Tension Regulator No. 1.
E.Disconnect rudder input lever and Elevator input
lever in the following way: unscrew the bolt collect
washers and nuts, collect cotter pin.
F.Unscrew the two bolts fixing the assembly to the
structure.
G.Remove the assembly from aircraft and position it
on workbench.
H.Remove the cotter pin from the top of the three,
then unscrew the nut that fixes the three
withsupport, extract the support, collect nut and
washers, left bearing inserted into the support.
I.Remove the nut spanner and washer from the top
of rudder quadrant.
J.Remove the Rudder quadrant.
27-20-35
2-252