TCH.1C-27J-2-27JG
2-34.1
REMOVAL. Remove the Rudder trim electrical
actuator as follows:
(Cont'd)
5.remove the bushing.
A.Unscrew the two screw that connect the two
bonding lead to Rudder trim electrical actuator.
B.Unscrew the linking bolt that connect the Rudder
trim electrical actuator to the aircraft structure as
follows:
6.remove the cotter pin;
7.unscrew the castellated nut and remove the flat
washer;
8.remove the bolt;
9.remove the flat washer;
10.remove the bushing.
A.Remove the Rudder trim electrical actuator.
2-34.2
INSTALLATION. Install the Rudder trim electrical
actuator as follows:
CAUTION
––––––––––––––––––––––––––––––––––
Do not move the rudder pedals or rudder
surface while performing this operation.
––––––––––––––––––––––––––––––––––
(Cont'd)
27-20-50
2-272