TCH.1C-27J-2-27JG
2-37.2
INSTALLATION. Install the Rudder travel limitation
unit as follows:
(Cont'd)
B.Torque tighten the four bolts fixing the RTLU to the
structure as follow:
1.insert the flat washers in the bolts;
2.insert the bolts in the connections;
3.torque tighten the bolts;
A.Reconnect the two bearings rod end in the RTLU
lever end connections.
B.Screw the bolts linking the two bearings rod end to
RTLU as follow:
4.insert the flat washers in the bolts;
5.insert the bush in the connection;
6.insert the bolts in the connections;
7.torque tighten to 10
÷
29 in lb (0.115
÷
0.334 mkg)
the castellated nuts;
8.insert the cotter pins;
A.Position the bonding lead on the structure, insert
the washer, bolt and torque nut to 20
÷
25 in
lb(0.230
÷
0.288 mkg).
B.Connect the two electrical connectors.
C.Remove the rigging pin from rudder quadrant.
27-20-55
2-299