TCH.1C-27J-2-27JG
2-39.2
ELEVATORS TRAVEL CHECK (refer to figure
)
and (refer to figure
4.Install on both stabilizers surface, in correspondence
of the trim tab outer end, the templates (AGE NO.
00065) for elevator travel check.
5.Install on both elevators surface, in the area between
balance tab and trim tab, the templates for balance
tab travel check (AGE NO. 00038).
6.Ensure that the control stick (4 and 5) is to neutral
position.
7.Move by hand slowly the pilot control stick from
neutral to fully forwards (12.50
°
+
0.25
°
/-0.00
°
) and
maintain. Check the followings conditions:
-left elevator 25
°
±
1
°
downwards.
-right elevator 25
°
+
0
°
/-2
°
downwards;
8.Return the Pilot control stick (5) to neutral position.
9.Move by hand slowly the Pilot control stick (5) from
neutral to fully backwards (13.50
°
+
0.25
°
/ -0.00
°
)
and maintain. Check the following conditions:
-left elevator 25
°
±
1
°
upwards.
-right elevator 25
°
+
0
°
/-2
°
upwards;
10.Return the Pilot control stick (5) to neutral position.
11.Move by hand slowly the copilot control stick (4) from
neutral to fully forwards and maintain. Check the
followings conditions:
-left elevator 25
°
±
1
°
downwards.
-right elevator 25
°
+
0
°
/-2
°
downwards;
12.Return the Copilot control stick (4) to neutral position.
13.Move by hand slowly the Copilot control stick (4) from
neutral to fully backwards and maintain. Check the
following conditions:
-left elevator 25
°
±
1
°
upwards.
-right elevator 25
°
+
0
°
/-2
°
upwards;
(Cont'd)
27-30-00
2-310