TCH.1C-27J-2-27JG
2-57.1
(refer to figure
CAUTION
––––––––––––––––––––––––––––––––––
The PITCH TRIM ACTR (DRIVE) (28) and
the PITCH TRIM ACTR (SLAVE) (26) must
be set to rig position. If it is not possible
to position the TRIM to rigged position it
can be adjusted manually until this
position is reached.
––––––––––––––––––––––––––––––––––
5.Disconnect the shaft (27) that connect the Pitch trim
actuator (drive) (28) to Pitch trim actuator (slave) (26).
6.Remove bolts (16 and 18), washers (15 and 17) and
self locking nuts (11 and 25) and disconnect the Pitch
trim actuator (slave) (26) from Pitch feel trim unit (5).
Discard removed self locking nut.
2-57.2
INSTALLATION (refer to figure
)
and (refer to figure
CAUTION
––––––––––––––––––––––––––––––––––
The PITCH TRIM ACTR (DRIVE) (28) and
the PITCH TRIM ACTR (SLAVE) (26) must
be set to rig position. If it is not possible
to position the TRIM to rigged position it
can be adjusted manually until this
position is reached.
––––––––––––––––––––––––––––––––––
1.Position the Pitch trim actuator (slave) (26).
2.Fix the Pitch trim actuator (slave) (26) to Pitch feel
trim unit (5) using bolts (16 and 18), washers (15 and
17) and new self locking nuts (11 and 25).
(Cont'd)
27-30-40
2-474