TCH.1C-27J-2-27JG
NOTE
A strong noise shall be heard as advise of
the JOM unlocking.
NOTE
If the unlocking value obtained is out of
tolerance it is needed to perform a JOM new
calibration according to dedicated
procedure.
6.Close the JOM (3) in accordance with the related
procedures and check that the ACAWS warning
message PITCH DISCONNECT disappears on CMDU
while the warning aural tone ceases.
7.The FD message PITCH DISCONNECT remains
displayed until the clearing of the CMDU is performed
via SAMU.
8.Move the AIR SPEED selector (1) to HIGH position.
9.Repeat the test as per steps 2 to 7 using the
dynamometer (AGE NO. 00034) and check that
unlocking jam override mechanism disconnection
occurs at 900 N (202.33 lb) (91.77 kg) max.
FOLLOW ON MAINTENANCE:
1.Unlock the copilot control wheel by removing the
locking tool (AGE NO. 00079).
2.Remove the dynamometer (AGE NO. 00034).
27-30-50
2-484