TCH.1C-27J-2-27JG
2-15.2 MEASUREMENT OF AILERON CONTROL
CONVENTIONAL PLAY (refer to figure
) , (refer to figure
) and (refer
to figure
4.Fit the tool (AGE NO. 00183) to underside of the left
aileron for locking of the intermediate control lever of
the balance tab, so that the left aileron and balance
tab are locked each other.
5.Lock the left Differential Lever by means of the proper
locking tool (AGE NO. 00036).
6.Apply, by the dynamometer (AGE NO. 00034), on the
left aileron trailing edge, a vertical load and measure
the left aileron displacement as follows:
NOTE
Care should be taken to apply the load to
the aileron T. E. and not to the tab T. E.
A.Gradually apply a load upwards up to 22.48 lb
(10.20 kg) maximum, leaving out the reading on
the comparator (AGE NO. 00062).
B.Stepwise unload, every 4.50 lb (2.04 kg), up to
zero load and simultaneously read, on the
comparator (AGE NO. 00062), the related
displacement value of the left aileron.
C.Stepwise load downwards, every 4.50 lb (2.04 kg),
up to 22.48 lb (10.20 kg) maximum and
simultaneously read, on the comparator (AGE NO.
00062), the related displacement value of the left
aileron.
D.Stepwise unload, every 4.50 lb (2.04 kg), up to
zero load and simultaneously read, on the
comparator (AGE NO. 00062), the related
displacement value of the left aileron.
(Cont'd)
27-10-10
2-101