TCH.1C-27J-2-27JG
Consumable Material Required:
None
Safety Conditions:
Be aware of information contained in SAFETY
PRECAUTIONS (refer to para
maintenance
PROCEDURE:
2-19.1 ADJUSTMENT AILERON REAR QUADRANT
(refer to figure
CAUTION
––––––––––––––––––––––––––––––––––
During the play check, no working stress
must be applied to the aircraft in order to
avoid wrong indication of the comparator
(AGE NO. 00062).
––––––––––––––––––––––––––––––––––
NOTE
In this document the load to be applied is
expressed in force value and not in torque
moment. It is intended that, during the test,
the load must be applied in the best point
where the comparator (AGE NO. 00062) is
able to read.
1.To calculate correctly the play (refer to figure
) proceed as follows after that the diagram
load applied vs surface displacement has been drawn:
-draw the tangent to the highest point of the
unloading curves (U1 and U2) and of the loading
curves (L1 and L2) up to the intersection with the
surface displacement axis;
-the play value C2 is the distance between the
intersection of the lines U2 and L1 read on the
surface displacement axis;
(Cont'd)
27-10-15
2-147