TCH.1C-27J-2-27JG
2-20.1 REMOVAL (refer to figure
) , (refer
to figure
)
(Cont'd)
C.LH (RH) aileron fuselage cable (if is necessary
remove the LH (RH) aileron fuselage cable in
accordance with maintenance task remove/replace
LH (RH) aileron fuselage cable (refer to para
)
).
5.Remove the cables (17, 20, 25 and 32) from the LH
(RH) Aileron Pulley (19).
6.Remove the spacer (12).
7.Extract the pulley (19) and remove the washer (24).
8.Loosen the bolts (21 and 27) that connect the sector
support (23) and remove the washers (22 and 26), if is
necessary the removal of the sector support (23).
2-20.2 INSTALLATION (refer to figure
(refer to figure
) , (refer to figure
) and (refer to figure
)
1.Replace the LH (RH) Aileorn Pulley (19).
2.Tighten the bolts (21 and 27) that connect the sector
support (23) and install the washers (22 and 26), if
previously removed of the sector support (23).
3.If pulley (19) is not assembled with support (23) install
the pulley (19) in the following way:
A.Position the washer (24) and insert the pulley (19).
B.Insert the spacer (12).
4.Insert the following cables (17, 20, 25 and 32) in the
LH Aileron Pulley (19).
(Cont'd)
27-10-15
2-157