TCH.1C-27J-2-27JG
2-57.1 MANOEUVRE EFFORT AND Q-FEEL
FUNCTIONAL CHECK (refer to figure
) and (refer to figure
NOTE
Ensure that the circuit breakers ENG 1 NIU
1 (5EN) (12) and ENG 2 NIU 2 (4EN) (10)
respectively located on Rear Mid Circuit
Breakers Panel (451VE) (11) in position K
21 and on Rear Upper Circuit Breakers
Panel (452VE) (9) in position F 12 are
opened.
2-57.2 Q-FEEL OPERATING (AIR DATA VALID) - LOW
SPEED (refer to figure
1.Ensure that the elevator surface are to neutral
position.
2.On the FCS 2 Control Panel (104VE) (13), set the AIR
SPEED selector (14) to AUTO position.
3.Simulate an aircraft low speed of 100 kts by setting a
dynamic pressure of 16.3 mbar in both channels.
Check that the caution Q-FEEL/TLU AD FAIL is not
illuminated on the ACAWS.
CAUTION
––––––––––––––––––––––––––––––––––
During the execution of the next para be
sure that the elevators movement area is
free of obstacles.
––––––––––––––––––––––––––––––––––
4.By means of dynamometer (AGE NO. 00034), apply a
load until the control stick begins to move. Check that
the breakout force is 34.5 N (7.75 lbf) max.
(Cont'd)
27-30-40
2-447