TCH.1C-27J-2-27JG
2-69.1 ADJUSTMENT OF FLAP CONTROL LEVER (refer
to figure
) and (refer to figure
NOTE
When the cables stretching is complete,
check that the terminal lugs are tightened on
the turnbuckle coupling with the same
number of turns. Furthermore check that no
more than 3 threads are visible on each
terminal lug.
2-69.2 FLAP CONTROL FRICTION CHECK (refer to
figure
1.Unlock the flap control lever (1) from the geared
sector and maintain by connecting a suitable spacer.
2.By means of dynamometer (AGE NO. 00034) check
that the friction of the flap control in both manoeuvre
ways does not exceed 20.23 lb (9.18 kg).
2-69.3 BACKLASH MEASUREMENTS OF FLAP WITH
FLAPS RETRACTED
2-69.4 LEFT OUTBOARD FLAP (refer to figure
1.Ensure that the left outboard flap is to zero position.
2.Fit on the left outboard flap trailing edge the backlash
test equipments (AGE NO. 00067) and set the
comparator to zero.
NOTE
The comparator must be no more zeroed
until the test is terminated.
3.Apply, on the left outboard flap trailing edge, a vertical
load (AGE NO. 00034) and measure the left outboard
flap displacement as follows:
A.Gradually apply a load (AGE NO. 00034) upwards
up to 22.40 lb (10.20 kg), maximum, leaving out
the reading on the comparator.
(Cont'd)
27-50-00
2-516