TCH.1C-27J-2-27JG
2-81.1 REMOVAL. Proceed as follows: (Cont'd)
I.Unscrew the flap casing assy, unscrew the two
nuts that fix the flap swivelend assy on the
structure.
J.Remove the flap swivelend assy from the flap
cable assy.
2-81.2 INSTALLATION. Proceed as follows:
A.Install the Flap Swivelend Assy.
B.Insert the Flap Swivelend Assy from Flap Cable
Assy.
C.Position the flap swivelend assy on the structure.
D.Screw the two nuts that fix the flap swivelend assy
on the structure and torque tighten to 106 ÷115 in
lb.
E.Screw the casing assy into the flap swivelend assy
and torque tighten to 44 ÷ 53 in lb.
F.Lock nuts with safety wire, using double twist
method, per MS33540.
G.Screw the flap slidingend assy on the flap cable
assy till previously noted position.
H.Screw the Flap Clevis to Flap Cable Assy till
previously noted posiiton.
I.Screw the flap clevis on the flap cable assy and
torque tighten to 53
÷
62 in lb between flap
slidingend assy and flap clevis.
J.Lock the safety wire using double twist method per
MS33540.
K.Place the washers and the nut in the Flap Clevis
connection.
L.Screw the bolt fixing the flap clevis to flap lever
assy and torque tighten to 50 ÷ 75 in lb.
27-50-45
2-602