TCH.1C-27J-2-27JG
AGE
No.
NOMENCLATURE
P/N
00262 Test stand, hydraulic system
(diesel engine)
846805-D**
Consumable Material Required:
LCM
No.
NOMENCLATURE
P/N
QTY
00052 PIN, COTTER
MS24665-153
1,00
Safety Conditions:
Be aware of information contained in SAFETY
PRECAUTIONS (refer to para
maintenance.
PROCEDURE:
NOTE
This procedure is valid for LH control wheel.
For RH control wheel is similar.
2-6.1
TRAVEL CHECK OF THE CONTROL WHEEL
(refer to figure
)
1.Fit the fixture control wheel travel measurement (AGE
NO. 00066) on pilot control wheel, fit on it the
inclinometer (AGE NO. 00061) in order to check the
control wheel travel.
2.Perform some manoeuvre on pilot control wheel
all-to-left and all-to-right position and check that
angular travel is 80.75
°
-0 ° / + 2
°
(read on
inclinometer) in both position. Furthermore also check
that the whole control is free without interferences.
3.Remove the fixture control wheel travel measurement
(AGE NO. 00066) from the control wheel.
27-10-00
2-18