TCH.1C-27J-2-27JG
2-95.2 INSTALLATION (refer to figure
)
and (refer to figure
) (Cont'd)
B.Connect pipe (12) to union (13) and torque (AGE
NO. 00054) tighten nut.
10.Connect supply hydraulic pipe (6) of the hydraulic
system No. 1 in the following way:
A.Remove the plug of the pipe (6).
B.Connect pipe (6) to union (5) and torque (AGE NO.
00054) tighten nut.
11.Connect the electric connector (48).
12.Remove rigging pin (AGE NO. 00181) (1) on the
bellcranck of the spoiler mechanical mixer box (2).
13.Remove the container used for collect drained fluid.
NOTE
Don't use the drained fluid collected to refill
hydraulic circuit.
FOLLOW ON MAINTENANCE:
1.Connect electrical power to aircraft (refer to manual
2.Restore hydraulic power system at 3000 psi, (210
).
3.Visually check for absence of hydraulic leakage
through the coupling.
4.Close the access panels 532B and 532C (632B and
632C).
5.Perform the adjustment as described in
ADJUSTMENT SPOILER CONTROL LINE LH SIDE
(refer to para
) and ADJUSTMENT SPOILER
CONTROL LINE RH SIDE (refer to para
) .
6.Perform SPOILER CONTROL SYSTEM functional
7.Perform the backlash of the spoiler surface (LH or
RH) (refer to para
27-60-10
2-688