TCH.1C-27J-2-29JG
2-17.2 INSTALLATION (refer to figure
(refer to figure
) , (refer to figure
)
and (refer to figure
CAUTION
––––––––––––––––––––––––––––––––––
Avoid hydraulic fluid spilling.
––––––––––––––––––––––––––––––––––
3.Connect the case drain flex hose (13) to the engine
driven pump (56).
4.Position the engine driven pump (56) on the gear box.
Torque tighten the case drain flex hose nut to 215 thru
280 in lb (2.5 thru 3.2 m kg) (AGE NO. 00054).
5.Remove the engine driven pump (56) and position it
than the firewall fittings.
CAUTION
––––––––––––––––––––––––––––––––––
Avoid hydraulic fluid spilling.
––––––––––––––––––––––––––––––––––
6.Connect the suction flex hose (14) to the engine
driven pump (56).
7.Position the engine driven pump (56) on the gear box.
Torque tighten the suction flex hose nut to 1140 thru
1370 in lb (13.1 thru 15.8 m kg) (AGE NO. 00054).
8.Remove the engine driven pump (56) and position it
than the firewall fittings.
CAUTION
––––––––––––––––––––––––––––––––––
Avoid hydraulic fluid spilling.
––––––––––––––––––––––––––––––––––
9.Connect the supply flex hose (12) to the engine driven
pump (56).
(Cont'd)
29-10-15
2-116