TCH.1C-27J-2-29JG
2-4.1
DESCRIPTION OF EQUIPMENT (Cont'd)
A.BASIC TOOLING: portable swager Model 5175E
and 5270E comprising swaging head assembly
and electric pump.
Model 5175E for tubing OD 1/4" to 1/2" (-04 to
-08)
Model 5720E for tubing OD 5/8" to 1/2" (-10 to
-24)
B.EXTERNAL TOOLING: jaws and anvils for sizes of
tubing and fitting shape (union of sleeve) (refer to
figure
) and refer to internal swaging process for
details and specific P/N.
C.INTERNAL TOOLING: drawbolt, expander, pair of
seal rings, bushing and anti-extrusion ring. Internal
tooling is assembled for use as shown in (refer to
figure
) .
2-4.2
INTERNAL SWAGING PROCEDURE
1.PREPARATION. Prior to assembly, each part must be
checked for freedom from contamination (chips, dirt)
and damage. Contamination must be removed by a
clean cloth dampened with methylethylketone. The
machine must be equipped in the following order:
A.Insert the adapter corresponding to the drawbolt in
the tool head, and tighten.
B.Insert the appropriate anvil for the pipe diameter
and the fitting shape used (union of sleeve); arrest
it by means of the retaining nut, and select the
corresponding jaws.
C.Equip the drawbolt per internal tooling depending
on the pipe wall thickness and the fitting shape
(union of sleeve) to be swaged, and install it in the
already fitted adapter.
29-00-20
2-19