TCH.1C-27J-2-29JG
2-5.4
HYDRAULIC SYSTEM 1 RE-OILING (Cont'd)
-ELEVATORS CIRCUIT
1.Move the control stick forward and rearward to allow
the elevators to travel upward and downward.
2.Repeat the control stick actuation 26 times until the
elevators circuit is scavenged (26 elevators actuation
cycles correspond to 2 oil litres discharged from the
elevators circuit).
3.Stop the re-oiling of the elevators circuit.
-SPOILERS CIRCUIT
1.Move the control wheel leftward and rightward to allow
the left and the right spoilers to travel from neutral to
upward.
2.Repeat the control wheel actuation 14 times until the
spoilers circuit is scavenged (14 spoilers actuation
cycles correspond to 2 oil litres discharged from the
spoilers circuit).
3.Stop the re-oiling of the spoilers circuit.
-FLAPS CIRCUIT
1.Press the flap selection pushbutton to illuminate
NORM indication (System 1 selected).
2.Move the flaps control lever to FULL to allow the flaps
to extend fully, then select UP to allow the flaps to
retract fully.
3.Repeat Flaps actuation 3 times until the Flaps circuit
is scavenged.
4.Stop the re-oiling of the Flaps circuit.
-WHEEL BRAKES EMERGENCY CIRCUIT
1.Select the Emergency brake handle.
2.Connect a transparent pipe to the bleeder valve of the
four brakes and put-in in a suitable container.
3.Lower and maintain the control lever of the fwd
wheels fuse by-pass and the control lever of the fuse
by-pass connected to the LH fwd wheel.
(Cont'd)
29-10-00
2-34